(c) 2020 Wastey - All rights reserved.

Are you looking for a step-by-step guide to putting fake grass in your home or garden? We’ve put together this informative and straightforward instruction on laying artificial grass over a grass or soil base for individuals who don’t want to hire a turf laying contractor in Sydney.  

You’ll be resting in your fresh new fake grass garden in no time if you follow these guidelines. 

  • Before you begin turf laying: 

There are a few things to think about before you start. 

  • What is the approximate amount of material you will require? 

Make sure you measure your job location so you can order the proper amount of materials and stick to your budget. Turf is typically 15′ wide, but it can be cut to any required length. It’s critical to pay attention to blade facing direction and ensure that all turf areas are facing the same direction. You may always contact a turf laying contractor if you need help with artificial turf layouts. 

  • Do you already have a sprinkler system in place? 

The sprinkler system must be either capped or removed. 

  • How to Install Synthetic Grass 
  1. Remove all grass 
    It’s time to get rid of that grass that’s been causing you so much trouble for years! Say goodbye to the water costs, brown spots, mowing, and muck. 4 inches of your existing lawn or base should be removed. Keep in mind that the earth adds up quickly. It’s a good idea to have a dump trailer on hand. Make sure you get the correct measurements to dispose of your old base properly. For more information on properly disposing of your soil, go to your local city’s website. If that seems like too much labour, you may always hire a turf laying contractor in Sydney
  1. Prepare the base 
    Evenly spread 4 inches of class 2-road base (or comparable) (or similar). It will be simple to establish a level platform with sufficient drainage using the class 2-road base. To prevent vegetation from developing, we recommend utilising a weed barrier. Wet the area lightly and compact it with a compactor until the surface is smooth. 
  1. Place the turf 
    Place your new artificial grass on the ground. Make sure your grass doesn’t get dragged across your freshly prepared base. It’s ideal to let the turf lay in the sun for 30 minutes to an hour before installing it to allow it to expand. If you’re dealing with several rolls, be sure the blade direction and stitch patterns are all facing the same way. When blade directions cross, the effect is a sloppy appearance. Nudge and shift your artificial grass into the correct position with care. While managing the turf, use knee protectors to protect your knees and shins. 
  1. Cut the turf to fit your lawn 
    Now that the turf has been placed in the desired location, it’s time to make the necessary cuts. Razor knives and carpet cutters are the best cutting tools. All cuts should be performed from the back of the synthetic grass so you can see the stitch rows. Leave 1/4″-1/2″ of turf over the edge of your border when cutting; this will aid in the finishing touches at the end of your job. If you’re working with many pieces of synthetic grass, now is the time to use seam tape and turf glue to bind the seams. When seaming your turf, make sure the blades are laying in the same direction and that the spacing between each stitch row matches for the greatest visual appearance. Place the red line of the seam tape at the centre of the seam, and use your glue to make an “S” pattern on the seam tape. Position the turf in place and wait 15 minutes for the adhesive to dry. The seam will vanish once it is smoothed up. To ensure that your infill bags are in contact with the seam tape, place them equally on the seam. 
  1. Secure your artificial grass to the ground 
    Begin by using a metal putty knife and hammer to tuck the 1/4″ to 1/2″ edge you left into the border. Non-galvanised turf nails or staples are recommended. Gently tap the nail or staple with a hammer until it pierces the backing. With your fingers, disperse the turf blades and drive the nail or staple into the earth. A nail or staple should be inserted every 6 inches along the outside perimeter and every 2 feet on the interior. Use a few nails or staples to reinforce your seamed regions. Before you infill, use a power broom or a push broom to clean up the turf. The blade memory will now be vertical. 
  1. Spread the infill 
    It’s critical to meet the infill needs of the turf system you’ve purchased if you want your artificial grass to look well, perform well, and last long. Please inquire about infill needs with a turf laying contractor in Sydney, as there are many various types of acceptable filler that can be utilised. 
  1. Brush the infill 
    Brush the turf with a stiff-bristled broom once the infill has been applied. This will help the turf blades stand straight up, giving your new synthetic lawn the appearance of newly cut grass. Repeat the technique until your infill is equally distributed and your seams are no longer visible. With all the steps complete, your new turf should be ready to use. 

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website. 


Leave A Comment